car wire fire the 12v source
12 Volt Housings

 
12 volt
car stereo
car security
 
 

 

 


Car Security

5 Wire Door Locks

With the doorlock switches wired directly to the motor located in the doors, all wires will rest at ground while the switch is in the off position, excluding the 12 volts. Once the switch is activated to lock the doors it becomes disconnected from ground, 12 volts will be sent to the motor which will lock the doors. Once the switch is activated to unlock the doors the voltage is reversed which in turn move the actuator in the opposite direction.

 

Reverse Polarity Positive Door Locks

Two relays are required for these applications. The factory door lock wires will be spliced to simulate the original configuration. One wire has (+)12 volts all the time, other wires are normally grounded without working the switch. One or two wires are grounded at all times. One wire is grounded normally but switches to (+)12 volts when the switch is moved to the lock position. One wire is grounded normally but switches to (+)12 volts when the switch is moved to the unlock position.

5-wire-alternating-positive-door-locks

 

 

 

 

 

 

 

 


 

Contact All Rights Reserved © Carwirefire.com Privacy Policy